Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Odyssey Gyro G3
$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
Odyssey Gyro G3 Lower Cables
$7.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Odyssey High Pressure Rim Strips
$4.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
Odyssey MPEGs Steel Pegs
$14.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
GSport G.L.A.N.D. MK IV Hub Guards
$9.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
Odyssey Monolever
$19.99
The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.
Odyssey Springfield Brake Kit
$29.99
The Springfield Brake Kit will provide easy braking upgrades along with value, as the kit will be more affordable than buying each part individually. All necessary hardware will be included as well. Doesn't get much better! - One spring design - Comes with GHOST PADS - Hinged lever clamp - Medium sized lever
Odyssey Springfield Lever
$10.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.
Odyssey Cable Knarps
$3.99
- Sold in pairs. - Allen wrench included.
Odyssey Par Ends
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
WeThePeople Grippin 20 x 2.25
$38.99
WeThePeople's Grippin tire is an excellent all-around tire. With a semi-tread design and a durable, grippy rubber compound, this tire can rail dirt berms and vert ramps alike.
Odyssey Grandstand Alloy Pedals
$32.99
The Grandstand pedal features a unique slim profile, a wide platform and a comfortable concave that feels exceptional as soon as you set foot on it. All of Odyssey's pro riders have been after them since the first samples came in. The pedal features a unique bearing configuration that allows a big spindle to be paired with a slim pedal body. The metal version includes 8 durable and replaceable steel pins per side. - 9/16” only
Sunlite Seatpost Top Plate
$1.99
This is a replacement top plate for the Sunlite/SR seatposts. This is the top part of the clamp that holds the saddle rails.
Hayes G1/G2 Piston Kit
$8.72
Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal
Cane Creek 40 Series ZeroStack Top Cover
$36.00
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
FSA MegaExo 12 Left Arm Crank Bolt
$2.99
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
Jagwire Road Pro Complete Cable Kit
$48.99
Jagwire's Road Pro Complete Cable Kit is the perfect way to upgrade your shifting and braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM shift and brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved performance. Plus, with all the small parts included in the kit it's easy to install.
Shimano Deore XT Shadow Rear Derailleur Direct Mount (Long Cage)
$118.45
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. The Direct Mount uses less parts and provides a solid connection to your machine. The Shadow design tucks the rear derailleur closer to the wheel, which keeps it out of the way of roots and rocks as you're flying down the trail. A strong spring prevents chain slap, reducing noise while on the trail, and improving chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
Hayes Hydraulic Tubing Kits
$31.50 - $45.00
Kevlar reinforced (black) hydraulic tubing: DOT-3/4/5.1 compatible - Prime Series kits are for Prime Pro, and Prime Expert brakes only - Stroker Ace/Gram/Carbon/Trail and El Camino kit includes specific fittings for lever and caliper (not for Stroker Ryyd - HFX-Mag/G2 kit includes a pre-crimped inline caliper fitting and specific HFX-Mag lever attachment (can be used with older G1 caliper if angle warrants fit) - HFX-9 kit includes a pre-crimped inline caliper fitting with specific HFX-9 lever attachment - Sole and Stroker Ryde kit includes specific fittings for lever and caliper - Tubing parts that fit HFX-Mag also fit Original, DH, FR, and Comp systems
Speedplay Zero Chromoly
$129.00 - $139.00
Speedplay's Zero Chromolys are fantastic pedals for road cycling thanks to their low weight, cornering clearance, adjustability and easy dual-sided entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, or independently adjust the lateral and fore/aft positioning. They boast needle and cartridge bearings and a cleat-based engagement mechanism that ensures you won’t clip out when going hard.
Wolf Tooth Components 104 BCD Chainrings
$59.95 - $63.95
The 104 BCD chainring was Wolf Tooth’s first product ever and it is the most common bolt pattern on double and triple cranksets. Wolf Tooth’s patented Drop-Stop tooth design is the best available anywhere. Compatibility: - These rings fit any 104 BCD crankset - 30 tooth rings require chainring bolts that are 7-10mm long. All other sizes require single ring specific bolts that are ~6mm long. - 30t x 104BCD ring is the only QUARQ power meter compatible 30t ring available! - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 64/104 Chainring
$63.95 - $75.00
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Cyclocross Chainring
$79.00 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Giant Cog
$85.00 - $90.00
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Set of 4 Chainring Bolts for M8 Threaded Chainrings (10mm Long)
$14.95
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$19.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wheels Manufacturing Inc. Chainstay Protector
$5.00
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
Wheels Manufacturing Inc. Derailleur Hanger 131
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 27
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
WTB Comfort Zone Clamp-On
$23.99
WTB's Comfort Zone Clamp-Ons feature an ergonomic shape with a soft rubber. This design gives you more surface area to hold, absorbs shocks and vibrations, and prevents any hot spots in your palms.
Page 1 of 13 Next page